Product Info
제품안내
라미네이터
PROSYNC-320R4 | PROSYNC-470R4
PROSYNC-320R4 | PROSYNC-470R4
Whatever the requirements for applications are, these laminators are more than effectively used for Lamination service shop, Print shop, Photo shop, Copy center, Advertising material manufacturer, ID card issuing agency, etc.
Whatever the requirements for applications are, these laminators are more than effectively used for Lamination service shop, Print shop, Photo shop, Copy center, Advertising material manufacturer, ID card issuing agency, etc.
Overview
Features
▶ Designed for hot & cold laminating mounting, transfer
▶ Clam shell type roll coverings for easy of cleaning and maintenance
▶ Easy step for setting temperature & speed by each film thickness
- Easy Operation - Pre-set key according to the type of operation
- Safe Operation - Cooling fan assures stable temperature keeping for long time operation
- Expense -Saving Turn over of Stand-by mode after one idle hour, Sources of Electricity off after two idle hours and power down after 30 minutes
▶ Clam shell type roll coverings for easy of cleaning and maintenance
▶ Easy step for setting temperature & speed by each film thickness
- Easy Operation - Pre-set key according to the type of operation
- Safe Operation - Cooling fan assures stable temperature keeping for long time operation
- Expense -Saving Turn over of Stand-by mode after one idle hour, Sources of Electricity off after two idle hours and power down after 30 minutes
▶ Efficient cooling system supports high speed laminating
▶ Sophisticated roller assures perfect laminating of any type of films
▶ Precise temperature via internally heated rollers with temperature control via infrared non-contact sensors
▶ Sophisticated roller assures perfect laminating of any type of films
▶ Precise temperature via internally heated rollers with temperature control via infrared non-contact sensors
Specification
| Model Name | PROSYNC-320R4 | PROSYNC-470R | ||
|---|---|---|---|---|
| 1260 mm/min | 1260 mm/min | |||
| Laminating Speed | ||||
| Laminating Width | 320 mm | 470 mm | ||
| Laminating Films | 75 mic ~ 300 mic | 75 mic ~ 300 mic | ||
| Substrate Weight |
80 g/㎡ ~ 250 g/㎡
|
80 g/㎡ ~ 280 g/㎡ | ||
| Thickness of Mount | 3 mm | 3 mm | ||
| Front Roller Diameter | 31 mm | 31 mm | ||
| Rear Roller Diameter | 30 mm | 30 mm | ||
| Power Requirements | 220 ~ 240 V, 50/60 Hz | 220 ~ 240 V, 50/60 Hz | ||
| Power Consumption | 1380 W, 5.8 A | 1520 W, 6.3 A | ||
| Warm Up Time | 3 minutes | 3 minutes | ||
| Heating System | Hot Roller Internal Infrared Heater | Hot Roller Internal Infrared Heater | ||
| Operating Temperature | 150℃ Max | 150 ℃ Max | ||
| Clame Shell Open | Open | Open | ||
| Speed Control | Key Pad Number Direct | Key Pad Number Direct | ||
| Temperature Control | Key Pad temperature Direct | Key Pad temperature Direct | ||
| Cooling System | DC Fan | DC Fan | ||
| Dimensions (W x L x H) | 585 x 274 x 147 mm | 745 x 274 x 147 mm | ||
| Type of Main Motor | DC W-Geared Motor | DC W-Geared Motor | ||
※ VTGMP reserves the right to change specifications without prior notice.
