제품안내
▶ Ergonomic capacitive panel
▶ Hot roller (inside infrared heater) technology
▶ Speed and temperature control
▶ Hot & Cold lamination
▶ Mounting up to 5mm thick foamboard (6-steps of roller gap adjustment)
▶ Accurate temperature measurement with thermo couple sensor
▶ Optional unwinder / rewinder for cold lamination and sleeking (in SMART-R series)
▶ Tension Control on Film Mandrel
▶ Speed Setting from 0.7~3 meters/minute
▶ Paper Guide on Feed Table
▶ MAX 5mm Thickness for FOAMBOARD® Mounting with Variable roller gap adjustment
▶ Cooling fan installed for hot lamination
Model Name | 355 /355R | 655 /655R | 1080S/1080RS | |
---|---|---|---|---|
3 m/min | 3 m/min | 3 m/min | ||
Max. Laminatin Speed | ||||
Max. Laminating Width | 355 mm | 655 mm | 1080 mm | |
Laminating Films | 25 mic ~ 500 mic | 25 mic ~ 500 mic | 25 mic ~ 500 mic | |
Substrate Thickness |
80 g/㎡ ~ 350 g/㎡
|
80 g/㎡ ~ 350 g/㎡ | 80 g/㎡ ~ 350 g/㎡ | |
Thickness Mount | 5 mm | 5 mm | 5 mm | |
Front Roller Diameter | 55 mm | 55 mm | 55 mm | |
Rear Roller Diameter | 30 mm | 30 mm | 50 mm | |
Power Requirements | 220 ~ 240 V, 50/60 Hz | 220 ~ 240 V, 50/60 Hz | 220 ~ 240 V, 50/60 Hz | |
Power Consumption | 1700 W, 7.0 A | 2000 W, 8.3 A | 2800 W, 11.6 A | |
Warm Up Time | 8 minutes | 8 minutes | 8 minutes | |
Heating System | Hot Roller Internal Infrared heater | Hot Roller Internal Infrared heater | Hot Roller Internal Infrared heater | |
Operating Temperature | 150 ℃ Max. | 150 ℃ Max. | 150 ℃ Max. | |
Speed Control | Touch Panel | Touch Panel | Touch Panel | |
Temperature Control | Touch Panel | Touch Panel | Touch Panel | |
Pressure Control | Manual (6 step) | Manual (6 step) | Manual (6 step) | |
Film Core | 14 - 25 WH | 14 - 25 WH | 19 - 58 WH | |
Cooling System | AC Fan | Blower | Blower | |
Dimensions(WxLxH) | 610 x 450 x 290 mm | 910 x 450 x 290 mm | 1380 x 450 x 1040 mm | |
Type of Main Motor | DC Geard Motor/010 | DC Geard Motor/010 | DC Geard Motor/012 |
※ VTGMP reserves the right to change specifications without prior notice.