Product Info
제품안내
라미네이터
SURELAM PRO-380D | SURELAM PRO-500D
High speed roll laminator (Single side & Double side)
Single side laminator and encapsulator.
Manual feeding and cutting.
Decurling bar.
For encapsulating processing shop and printing shop.
This heat shoe type roll laminator is designed for office, photocopy shop or commercial laminating service center.
With variable speed control up to 7meters per minute and variable temperature control.
The surelam pro series which has combination of heat shoes & hot roller system can handle all industry standard films up to 500microns
Single side laminator and encapsulator.
Manual feeding and cutting.
Decurling bar.
For encapsulating processing shop and printing shop.
This heat shoe type roll laminator is designed for office, photocopy shop or commercial laminating service center.
With variable speed control up to 7meters per minute and variable temperature control.
The surelam pro series which has combination of heat shoes & hot roller system can handle all industry standard films up to 500microns
Overview
Features
▶ Maximum laminating speed of 7m/min
▶ Increased film capacity
▶ Turbo cooling system
▶ Feed Guide on Feed table
▶ Safety shield
▶ Pre-set functions 8-bit micro-processor controlled
▶ LCD display helps to eliminate operator error
▶ Decurling device for single side lamination
▶ Increased film capacity
▶ Turbo cooling system
▶ Feed Guide on Feed table
▶ Safety shield
▶ Pre-set functions 8-bit micro-processor controlled
▶ LCD display helps to eliminate operator error
▶ Decurling device for single side lamination
- Heat shoe & Hot roller combination
- Top and bottom film alignment system
Specification
| Model Name | SURELAMPRO-380D | SURELAMPRO-500D | ||
|---|---|---|---|---|
| 7 m/min | 7 m/min | |||
| Max. Laminating Speed | ||||
| Max. Laminating Width | 380 mm | 500 mm | ||
| Laminating Films | 25 mic ~ 500 mic | 25 mic ~ 500 mic | ||
| Substrate Thickness |
80 g/㎡ ~ 350 g/㎡
|
80 g/㎡ ~ 350 g/㎡ | ||
| Front Roller Diameter | 50 mm | 50 mm | ||
| Rear Roller Diameter | 50 mm | 50 mm | ||
| Power Requirements | 220 ~ 240 V, 50/60 Hz | 220 ~ 240 V, 50/60 Hz | ||
| Power Consumption | 3000 W, 12.6 A | 3000 W, 12.6 A | ||
| Warm Up Time | 7 minutes | 7 minutes | ||
| Heating System | Heat Shoe & Infrared Heater | Heat Shoe & Infrared Heater | ||
| Operating Temperature | 150 ℃ Max. | 150 ℃ Max. | ||
| Speed Control | Key Pad | Key Pad | ||
| Temperature Control | Key Pad | Key Pad | ||
| Pressure Adjustment | Manual (5 step) | Manual (5 step) | ||
| Film Core | 19 - 58 WH | 19 - 58 WH | ||
| Cooling System | Blower | Blower | ||
| Dimensions(WxLxH) | 610 x 615 x 460 mm | 760 x 615 x 460 mm | ||
| Type of Main Motor | DC W-Geard Motor | DC W-Geard Motor | ||
※ VTGMP reserves the right to change specifications without prior notice.
