제품안내
▶Available Lamination with or witihout Embossing
▶Perfect Embossing Effects during High Speed Lamination
▶Overlay Embossing Possible with One time job
▶Suitable for massive operation (Laminating Speed : Max. 70m/min)
▶All electronic functions are controlled by a LS PLC, Servo motor and Driver
▶After Lamination, the laminated paper is stacked automatically
▶ A Stacking and palletized accessory for perfect alignment of finished output eliminates the need for hand jogging and pallet loading
* Model : Automatic Stacking Table-8000
* Out-put Height : 750mm
* Paper Size(MAX) : 800x1,100mm
* Dimensions(WxLxH) : 1,420 x 1,250 x 1,230mm
* Power Requirements : AC 220-240V, 50-60Hz
MODEL | PIONEER II -IDH 8000 DUAL | |||
---|---|---|---|---|
1540 x 3880 x 1517 mm | ||||
Laminator Dimension (W x L x H) | ||||
Stacker Dimensions (W x L x H) | 1420 x 1250 x 1230 mm | |||
Jogging Table Dimensions (W x L x H) |
- |
|||
Laminator Weight |
2500 kg
|
|||
Max. Laminating Speed | 70 m/min | |||
Max. Feeding Speed | 7500 sheets/hr | |||
Max. Sheet Format | 800 (W) x 1100 (L) mm | |||
Min. Sheet Format | 210 (W) x 250 (L) mm | |||
Substrate weight | 120 ~ 400 g/㎡ | |||
Feeder Loading Height | 750 mm | |||
Out-put Stacker Height | 750 mm | |||
Laminating Film | POLYNEX, NYLONEX, PERFEX, MICRONEX | |||
Front Roller Diameter | T: 214 mm / B: 200 mm | |||
Rear Roller Diameter | 100 mm | |||
Power Requirements | AC 380 ~ 400 V, 3N, 50 ~ 60 Hz | |||
Power Consumption | 29 kw | |||
Warm up Time | 15 min | |||
Heating System | Induction Heating System | |||
Max. Operating Temperature | 140 ℃ Max. | |||
Temperature control | PID Control | |||
Operating System | LS PLC (Programmable Logic Controller) | |||
Main Motor | LS 3.5 kw Servo Motor with Servo Driver | |||
Feeder Motor | LS 0.4 kw Servo Motor with Servo Driver | |||
Burster Motor | LS 0.43 kw Inductino Motor with Vector Driver | |||
Rewinder Motor | Induction Motor with LS Driver | |||
Vacuum Pump | Becker-T4, 40 | |||
Nip Pressure | Pneumatic Cylinder | |||
Film Core | Air Shaft (3 ") | |||
Cooling System | Air Cooling with Blower | |||
Feeding | GMP Brand Syncro Stream Feeder | |||
Cutting | Burst Cutting with Nicking Knife and Perforator | |||
Laminating Roller | Mirror Roller, Embossing Roller (1EA) | |||
Option | Embossing Roller, Water Heating System, MICRONEX Winder, Silicon Nip Roller |