Product Info
제품안내
Overview
Special Features
▶ The most important thing for quality of Thermal Laminating is the precise temperature control of roller.
▶ If the difference of temperature between central part and both sides of roller is over 10 , this could be a cause of decisive error for laminating quality.
▶ Basic Difference of Temperature in high speed condition;
- Heated Water or Oil Heat Medium Circulation System : 10
- Non Circulation System : 20
▶ However, GMP World First Developed Induction Heating Roller System controlling the difference within 2 and if necessary, the warm-up time can be reduced (within 5 mins.) and operating temperature can be increased (by 400) and can reduce difference of temperature (by 0.5 )
▶ Then, this is the remarkable technology for laminating.
▲ PACKERLAM-800RTR
▶ Roll-to-Roll Laminating
- Printing (Shopping Bags, etc.), Heating Film
▶ Roll-to-Roll Embossing
- Heat Treatment for Film & Various Substrates Film for Battery, Optical Film for LCD
▶ Bonding for Various Metal Substrates
- Thin Aluminum, Copper, etc.
Type of Embossing Patterns
Type of Embossing Patterns
Specification
| MODEL | PACKERLAM-800RTR | PACKERLAM-1200RTR | ||
|---|---|---|---|---|
| Laminating Width | 800 mm | 1200 mm | ||
| Laminating Speed | 15 m/min | 15 m/min | ||
| Laminating Films | 25 mic ~ 500 mic | 25 mic ~ 500 mic | ||
| Thickness of substrate (Paper) | 80 g/㎡ ~ 500 g/㎡ | 80 g/㎡ ~ 500 g/㎡ | ||
| Paper Roll Diameter |
600 mm |
600 mm | ||
| Diameter for Rewinder |
800 mm
|
800 mm | ||
| Film Shaft | Air Expending (3") | Air Expending (3") | ||
| Power Requirements | AC 400 V, 60 Hz, 3 Phase | AC 400 V, 60 Hz, 3 Phase | ||
| Power Consumption | 16 kw | 80 kw | ||
| Operating Temperature | 130℃ Max. | 130℃ Max. | ||
| Main Motor | 7.5 kw Servo Motor | 5.5 kw Servo Motor (2ea) | ||
| Tension Control | Powder Brake Control System | Powder Brake Control System | ||
| Laminator Dimensions (W x L x H) | 1200 x 1285 x 755 mm | 3092 x 2120 x 1630 mm | ||
| Laminating Roll Diameter | 214 mm |
Pre-heating 215 mm Nip roll 185 mm |
||
| Chill Roll Diameter | N/A | 265 mm | ||
| Nip pressure | Pneumatic Cylinder | Pneumatic Cylinder | ||
| Warm up Time | 20 min | 20 mm | ||
| Temperature Control | PID CONTROL | PID CONTROL | ||
| Heating System | Induction Heating | Induction Heating | ||
| Operating System | PLC | PLC | ||
※ VTGMP reserves the right to change specifications without prior notice.
