Product Info
제품안내
Max. Laminating Speed : 60m/min | Max. Feeding Speed : 12,500 sheet/ hr | Max. Sheet Format : 800(W) x 1,100(L)mm
[Patent Specification]
1.The method of forming embossing pattern by heating press mold partially on the printing surface laminated with thermal laminate film
2.Laminator with paper device
▶ Dual side laminator with maximum speed of 60m/min
▶ Possible to use various films(PET, NYLON,OPP etc..)
▶ Automatic Feeding, Laminating, Four Sides Cutting, and Loading
▶ Feeding
- High Speed Stream Feeder with Automatic Feeding (12,500papers/hour, Loading Height 1m)
- Non-Stop Feeding System (Not necessary to change papers)
- Accurate Feeder Distance Alignment Device and side Alignment Device controlled by Servo Drive
- Possible to add Heidelberg Suction Head(74) as an option
▶ Laminating
- Pair of large Preheating Roll for Perfect laminating
- Induction Heating System with accurate temperature controlling system
- Maintain uniform film tension with duplex break controller
- Water Chiller and Top & Bottom Chill Rolls for effective cooling with high speed laminating
▶ Cutting & Loading
- EPC(Edge Position Control) which can maintain the location of the film consistently
- 2 types of Side Slitter Structure for convenient use (Razor blade slitting, Shear slitting)
- Accurate Cutting Location with Cross Cutting Structure Controlling by Servo Drive
- Automatic Loading Auto Stacker
| MODEL | ENCAPSUMASTER-IDH 08N | |||
|---|---|---|---|---|
| Dimensions (W x L x H) | 1500 x 10340 x 1700 mm | |||
| Max. Laminating Speed | 60 m/min | |||
| Max. Feeding Speed | 12500 sheets/hrs | |||
| Max. Sheet Format |
800 (W) x 1100 (L) mm |
|||
| Min. Sheet Format |
250 (W) x 250 (L) mm
|
|||
| Substrate weight | 120 ~ 500 g/㎡ | |||
| Feeder Loading Height | 1000 mm | |||
| Front Roller Diameter | T: 315 mm / B: 335 mm | |||
| Rear Roller Diameter | T: 315 mm / B: 335 mm | |||
| Power Requirements | AC 380 ~ 400 V, 3N, 50/60 Hz | |||
| Power Consumption | 70 Kw | |||
| Warm up Time | 20 min. | |||
| Heating System | Induction Heating System | |||
| Max. Laminating Temp. | 135℃ Max. | |||
| Temperature control | PID Control | |||
| Operating System | Motion Control System | |||
| Main Motor | Parker 5.5 kw Induction Motor with Vector Driver | |||
| Feeder Motor | Parker 0.4 kw Induction Motor with Vector Driver | |||
| Vacuum Pump | Backer - DVT3.80 | |||
| Nip Pressure | Pneumatic Cylinder | |||
| Film Core | Air Shaft (3") | |||
| Cooling System | Cooling roll with Water Chiller | |||
※ VTGMP reserves the right to change specifications without prior notice.
