제품안내
▶ Only 10 mins. requires for set-up
▶ Automatic feeding system for both of offset & digital prints
▶ Wide range of substrates (120~300gsm) can be fed
▶ Easy to set-up with inching mode
▶ Easy to integrate with the exisiting GMP SURELAM Series laminator (ex : SURELAMⅢ-540)
▶ Ergonomic designed touch panel
▶ Hard surfaced rubber (H85) is applied to hot roller for high gloss effect in single & both side lamination
▶ Equipped decurling device for single side lamination
▶ 8-bit microprocessor for pre-program and save job modes for easy & user-friendly operation
▶ Equipped photo-eye sensor at feeding area for safety operation
▶ Available speed & temperature adjustment for perfect lamination
▶ Top & bottom film alignment system (patented)
▶ Compact & space-saving design
▶ Various kinds & thickness of substrates can be cut▶ Equipped tray table
Model Name | SUREFEEDER-5478 | SURELAMⅡ&Ⅲ-540 Series | EASYCUTTER-550 | |
---|---|---|---|---|
10 m/min | 7 m/min | 10 m/min | ||
Operating Speed (MAX) | ||||
Operating Width (MAX) | 540 mm | 540 mm | 550 mm | |
Laminating Films | - | 25 ~ 250 mic | 25 ~ 250 mic | |
Thickness of substrate(Paper) |
120 ~ 350 g/㎡
|
80 ~ 350 g/㎡ | 120 ~ 350 g/㎡ | |
Feeder Loading Height | 200 mm (300 g/㎡ 700 sheet) | - | - | |
Power Requirements | AC 220 V ~ 240 V, 50/60 Hz | AC 220 V ~ 240 V, 50/60 Hz | AC 220 V ~ 240 V, 50/60 Hz | |
Power Consumption | 300 W / 1.3 A | 2.8 KW / 12.6 A | 100 W, 1 A | |
Max. Temperature | - | 135 ℃ | - | |
Speed Control | SURELAM-540 Series |
Key Pad
|
Jog Dial | |
Film Core Adapter | - | 19HX / 77(3") BK / Core | - | |
Cooling System | - | Blower | - | |
Type of Main Motor | DC Geard Motor | DC W-Geared Motor/012 | Step Motor | |
Dimensions (WxLxH) | 830 x 1060 x 1250 mm | 780 x 615 x 555 mm (1250 mm) | 890 x 510 x 1044 mm |
※ VTGMP reserves the right to change specifications without prior notice.