제품안내
• All-in-one laminator for simplex & duplex lamination, sleeking job (Hologram,Metallic,Gloss,Matt)
• In-line configuration with EASYCUTTER-550
• Pre-heating roller performs higher speed lamination for thicker film.
• Razor cutting system (Flying knife) for easy-cutting PET/NYLON base thermal films.
• Lamination of film on both sides up to 250mic (Pre-heat Roller and Sub-heat plate)
• Strong heating power with double heating roller mechanism.
• State-of-the-art automatic feeder, silicone rubber rollers for 2-sided lamination as well as combination system of chrome / silicone rubber rollers for
single-sided lamination.
• Flying knife as a razor cutting system for easily & stably separating single-sided laminated surfaces including hard-to-burst types of film etc.
• Side slitting & winding system for accurate cutting results & convenience in controlling slit-laminated scrap.
MODEL | PROENCAP-540 |
---|---|
900 x 1890 x 1400 mm | |
Dimension (W x L x H) | |
Max. Laminating Speed | 15 m/min. |
Max. Paper size (W x L) |
540 mm x 750 mm |
Sleeking | Gloss, Matt, Hologram, Metalic |
Laminating Films |
POLYNEX, PERFEX, NYLONEX FILM
|
Substrate weight | 120 ~ 350 g/㎡ |
Power Requirement | AC 220 ~ 240 V, 25 A |
Power Consumption | 5.5 kw |
Warm-up Time (min.) | 10 min |
Heating System | INFRARED HEATER |
Laminating Temp. (℃) | 150 ℃ Max. |
Temp. Control | Touch-screen |
Speed Control | Touch-screen |
Display system | Touch-screen |
Roller pressure | Pneumatic cylinder |
Film core | 77 mm (3 ") |
Air Compressor | 2 HP, 135 L/min |
MODEL | EASYCUTTER-550 |
---|---|
890 x 510 x 1090 mm | |
Dimension (W x L x H) | |
Power requirements | 460 W, 2 A |
Substrate thickness |
120~35 0g/㎡ |
Max. cutting width | 550 mm |
Min. cutting length |
100 mm
|
Tension control | Servo Motor & Dancer Roll |
Cutting margin | -25~25 mm |
Max. cutting speed | 10 m/min |
Laminating films | 32~250 mic |
Speed control | Jog dial |
Type of main motor | Step motor |
※ VTGMP reserves the right to change specifications without prior notice.